How Long Should Your Grass Be When You Mow It?

Now that spring has sprung, it’s nearly time to dust off your lawn mower and get your yard looking immaculate.  Mowing a lawn is considered an art form by many people, as you will often see various patterns and trims as you head through your neighborhood.  One question that is often asked is regarding the length of cut grass.  The length of grass is vital to keeping a beautiful, green, weed-free yard.

When dealing with grass height, there are several considerations to be taken into account.  By keeping grass at least 3 inches tall until the autumn, you are ensuring that weed seeds from germinating and taking over your yard.  Those nasty crabgrass seeds need light to germinate, and by keeping your grass long, you ensure that doesn’t happen.  Certain species of grass, including bentgrass, Bermudagrass, and seasore paspalum can be cut down as low as one inch, but these are the exception, rather than the rule. 

Also, by keeping it at least 3 inches in length, you are ensuring that your soil doesn’t dry out, which leads to brown grass and overwatering.  Overwatering has become a problem in our Utah communities in the summer, especially with the water conservation acts that have become vital as our population continues to grow. 

It is also important to remember the rule of thirds.  What this means is that when you cut your grass, no more than one-third of the grass plant should be cut at any one time.  Then, after trimming the grass, you will need to wait at least 48 hours before trimming again.  The grass plant is sensitive, while resilient, and cutting it affects the plant, necessitating a 48-hour period to heal.  After these 48 hours have passed, the grass has had an ample opportunity to fully heal, so it can again be trimmed, by that same one-third ratio.

In order to ensure a freshly cut lawn, it’s vital to make sure that your lawn mower is in tip top condition.  If it is in need of service, Crowell’s Flying Wrench will help you get it running like new.  Crowell’s Flying Wrench is a full-service mobile repair company that specializes in small engines.  Our lawnmower repair in Sandy, UT will come to you and get your lawn mower running like new in no time.  Give Crowell’s Flying Wrench a call at (801) 860-3605, or visit our website at www.crowellsflyingwrench.com to schedule an appointment today!

How Often Should You Sharpen Your Lawn Mower Blade?

Although we are mired in the cold of winter, spring is never far away.  As those winter snows melt away and flowers begin to blossom, many of us get back into the routine of lawn care.  Part of that lawn care means unpacking the lawn mower and making sure your grass looks trimmed and well-maintained. 

If you've owned a mower for a while, you surely have noticed that your lawn mower might not seem to trim as cleanly or effectively as it did when it was brand new.  The quality of your work has decreased, and a mowing job that used to take you 30 minutes is now taking you 45 minutes, and the results just aren't as good.  No, your mower isn't losing its efficacy, nor does it have any mechanical issues.  In reality, your lawn mower blades are dull and the time has come for the blades to be sharpened. 

It is recommended that you sharpen lawn mower blades twice a season.  Considering the typical mowing season in Utah can range anywhere from 6-9 months, it’s something you will want to look to do at the beginning of the spring and at some point in the summer.  Sharpened lawn mower blades will help you maintain a green, healthy lawn.  A sharp blade not only cuts grass cleanly, but it reduces the time it takes to mow your lawn, as well as helping grass to recover quickly, helping you maintain that pristine, green lawn that you've worked so hard to cultivate.

A dull lawn mower blade doesn't cleanly cut grass.  In fact, it rips, pulls, and hacks grass blades, which leaves your lawn looking poor and promotes the invitation of fungal growth, disease, and weeds.  Grass that is not in top health can often be a battle that last months, or even years.  Sharpening a blade is important, and it’s something that is neglected far too often. 

Crowell’s Flying Wrench offers a mobile, convenient blade sharpening service that will come to you and leave you ready to mow your lawn like a boss once again.  Our friendly, professional service team will come to you anywhere in Park City and the SaltLake Valley to fix your mower, and no job is too big or too small.  We work on both push and sit down mowers, and our full-service offerings will also repair other lawn mower issues, including engine repair and full blade replacement.  Give us a call today to see what we can do for you!

By: Kyson Crowell

Cleaning the Carburetor on Your Lawn Mower or Small Engine

A clogged carburetor can wreak havoc on a mower or small engine. If it sounds like your machine is struggling to idle, is lacking power or simply won’t start, cleaning the carburetor may be the answer to your problems.

Removal will vary depending on the model and type of engine, but once completed, the cleaning process is pretty much the same. First, you need to clean off the dirt and grime from around the idle assembly and the rest of the carburetor. Buildup in this area is often the cause of idling issues.

Once you have cleaned the exterior you are ready to take it apart and clean the inside. Using a socket wrench, remove the bolt holding the bowl on the carburetor. Be careful here, because some gas may pour out. Hold the assembly over a cup to prevent spilling all over your workspace. Once the bowl is removed, set it aside for later.

Remove Float Pin

Using needle nose pliers, remove the pin that holds the float and needle in place. Set this aside in the bowl, where it can be easily retrieved later. Remove the needle and float assembly and set them aside as well. Here is where you break out the carburetor cleaner.

Using short, half-second bursts of canned carburetor cleaner, spray each of the tiny holes on the inside of the chamber. Turn the carburetor body over and spray again through the bottom. Be sure to spray in through the jet as well. Do not, however, spray any cleaner into the hole the needle goes into because it will eat away at the area.

spray in through the jet as well. Do not, however, spray any cleaner into the hole the needle goes into because it will eat away at the area.

Using thin gauge wire (or a stripped down twist-tie, clear out any blockage or debris stuck in these holes and the jet. Use the wire to clear out the holes in the fixed jet as well. Once finished, use a compressor or compressed air to blast out any remaining grime. Be sure to wear eye protection, because carburetor fluid is not gentle on the eyes. Once completed, you are ready to reassemble. When you’ve reassembled the carburetor and put it back on the machine you should be good to go!

Cleaning out the carburetor on your small engine may seem daunting, but it is one of the easier bits of maintenance you can do. Improve the performance of your machine and extend its useful life by going through this process frequently. It’s like they say, an ounce of prevention is worth a pound of cure. A little effort spent cleaning your carburetor regularly is worth it when compared to the price of a new motor. 

By: Kyson Crowell

How to Sharpen a Lawn Mower Blade

Spring is coming, and for many of us, that means it is time to pull the lawn mower out of the garage and get to work taming the jungle that your yard has become. But if your mower has seen its share of summers, it may be time to sharpen the blade.

If you are the do-it-yourself type, sharpening the blade is an

easy way to add a few years to the life of your machine. All you need to do is remove the blade, and take care of any rust you may find with a steel brush or some steel wool. Once the blade is free of rust, and the blade is free of major damage, you can start sharpening. Secure the blade in a table vice, and use a file to sharpen the cutting edge. As you move the file, it is important to match the angle of the cutting edge. This will allow the file to sharpen the blade, rather than dulling it.

The blade of your mower can be damaged in a number of ways, but most commonly it is caused by accidentally mowing over hidden hazards like sprinkler heads. If there are deep gouges or dents in the blade, it is best to have it professionally sharpened. There are countless options for lawn mower repair in Salt Lake City, UT. Do your research and find one you can depend on because you’ll need them for more than just sharpening the blade.  Like with cars, a little research and elbow grease can save you money when it comes to lawnmower maintenance. And just like cars, once you find a good mechanic for your mower, you’ll want to keep them around forever.

Lawn mowers aren’t incredibly complex machines. If maintained properly, they can last for many years. Sharpening the blade ever few seasons is an easy way to extend the life of your mower and it can often be done in your own garage. However, if the damage is too bad to fix with a file, you may need to consider having it looked at professionally. But don’t worry; just look at this as an opportunity to vet your new small engine mechanic! 

By: Kyson Crowell